Skip to content
⚡ Solar Homes rebate eligibility tightens on 1 July 2026. Want to lock in the current rules? Get the free 2026 rebate guide → 0484 372 744
VEU Registered Provider Licensed Electrical Contractor 50,000hr LED lifespan

Victorian Energy Upgrades (VEU) subsidy applied at installation. Supply Solar is a registered VEU provider — eligible LED fittings are subsidised at point of sale. No separate application required.

Commercial LED Lighting
Upgrades Melbourne

Lighting is one of the largest and most recoverable energy costs in any commercial building. A well-designed LED upgrade cuts your lighting electricity use by 50–70%, with a typical payback of 12–36 months after VEU subsidies.

50–70%
typical energy reduction from LED upgrade
12–36mo
typical payback after VEU subsidy
50,000hr
LED lifespan — no lamp replacements

Free Lighting Assessment

We audit your fittings & calculate your savings.

VEU Registered Provider
Licensed Electrical Contractor — VIC
AS 1680 compliant designs
2024 EUPD Installer Award
4.9★ · 312 reviews

Lighting Solutions

LED Upgrades for Every Commercial Environment

Each commercial environment has different lux requirements, ceiling heights, IP ratings, and operating hours. Supply Solar designs and installs to Australian Standard AS 1680 for every site type.

High Bay LED

Warehouse LED Lighting

160–300 lux | AS 1680

High bay LED fittings for warehouse ceilings from 6m to 16m. Replace 250W–400W metal halide with 80W–150W LED equivalents — delivering equal or better light levels at 50–65% less energy. Occupancy sensors reduce energy further in low-traffic aisles.

Ceiling height
6m – 16m
Fitting type
High bay LED
Replaces
Metal halide 250–400W
LED wattage
80W – 150W
Energy saving
50–65%
IP rating
IP65 (dust/wet)
LED Panels

Office LED Lighting

320–500 lux | AS 1680.2.2

LED panel fittings replacing T8 fluorescent tubes in office ceilings. Modern 600×600mm or 1200×300mm panels deliver 320–500 lux to AS 1680.2.2 at 36W–48W, replacing 72W dual-tube equivalents. CRI 80+ for accurate colour rendering and reduced eye strain.

Lux target
320–500 lux
Fitting type
LED panel 600×600mm
Replaces
T8 fluorescent 72W
LED wattage
36W – 48W
Colour rendering
CRI 80+
Energy saving
45–60%
Industrial LED

Factory & Manufacturing Lighting

300–750 lux | AS 1680.2.4

Factory and manufacturing floor lighting to AS 1680.2.4 — 300 lux for general assembly, 500 lux for precision work, 750 lux for fine detail tasks. Industrial LED fittings with IP65 or IP67 ratings handle dust, moisture, and vibration. Flicker-free for machine operation safety.

Lux range
300–750 lux
IP rating
IP65 / IP67
Replaces
Metal halide / HPS
Flicker
Flicker-free (<1%)
Energy saving
55–70%
Standard
AS 1680.2.4
Outdoor / IP65

Car Park Lighting

50–75 lux | AS 1158.3.1

Covered and open car park lighting to AS 1158.3.1 — 50 lux minimum for parking aisles, 75 lux at entry and exit points. LED fittings with occupancy sensors dim to 20–30% when unoccupied, cutting operating costs further. Suitable for multi-storey, basement, and surface car parks.

Lux (aisles)
50 lux min
Lux (entry/exit)
75 lux min
Standard
AS 1158.3.1
Sensors
Occupancy + daylight
IP rating
IP65 minimum
Energy saving
60–75% with sensors

Wattage Comparison — Old vs LED

Same light output. Fraction of the electricity.

Warehouse High Bay

Metal halide
400W
LED high bay
150W

Office / T8 Fluorescent

Twin T8 tube
72W
LED panel
38W

Car Park Fitting

Fluorescent
80W
LED + sensor
22W

50–70% less electricity for the same or better light levels. LED savings appear on the very first electricity bill after installation.

Why LED

How Much Can LED Lighting Save a Business?

A commercial LED upgrade reduces lighting energy consumption by 50–70% compared to metal halide or fluorescent fittings. Combined with the VEU subsidy applied at installation, most sites achieve payback in 12–36 months.

Savings appear on the first bill

Unlike solar, which requires a period of monitoring to verify savings, LED upgrades reduce consumption immediately. The wattage drop is visible on your electricity bill from the first cycle after installation.

No lamp replacement for 14+ years

Quality LED fittings are rated to 50,000 hours (L70). At 10 hours per day, that's over 13 years of operation with no lamp replacements. For warehouses and car parks where fittings are at height, this eliminates access platform costs entirely.

Better light, not just less energy

LED fittings deliver instant-on performance with no warm-up period, consistent colour temperature, and CRI 80+ for accurate colour rendering. Occupancy and daylight sensors add an additional 20–40% saving on top of the base wattage reduction.

Book a lighting audit →

Victorian Energy Upgrades (VEU)

The commercial LED subsidy — applied at installation

Point-of-sale discountThe VEU subsidy is applied directly to your installation cost — you pay the subsidised price, not the full amount with a rebate to chase later
Commercial sites eligibleWarehouses, offices, factories, car parks, retail, hospitality, and other commercial buildings are eligible for VEU LED lighting discounts
No application required from youSupply Solar is a registered VEU provider — we handle the VEU paperwork. You simply receive the subsidised price on your invoice
Discount varies by fitting type and quantityHigher-wattage replacements (e.g. 400W metal halide → 150W LED) generate more VEU benefit than lower-wattage replacements. Supply Solar calculates the applicable VEU value for your specific upgrade

Supply Solar is a registered VEU provider. Eligible LED upgrades are automatically subsidised at point of sale — the discount appears on your invoice without any paperwork from you.

Is there a rebate for commercial LED?

The VEU Program — Victoria's LED Rebate

Yes. The Victorian Energy Upgrades (VEU) program provides a point-of-sale subsidy on eligible commercial LED lighting upgrades. It is the primary government incentive for commercial LED upgrades in Victoria, and it applies at the time of installation — not as a separate rebate to apply for later.

1

Free lighting assessment

We audit your existing fittings, measure lux levels, review operating hours, and calculate your VEU-eligible discount before providing a proposal.

2

Proposal with VEU discount applied

Your proposal shows the net price after VEU subsidy. You see clearly what the upgrade costs after the government contribution.

3

Installation

Our licensed electricians install all fittings to AS 1680 compliance. VEU documentation is completed by Supply Solar as part of the job.

4

Invoice at subsidised price

You receive one invoice at the net amount. No rebate application, no waiting for a payment. The discount is built in from day one.

Australian Standards

Commercial Lighting Standards — What Lux Do You Need?

Australian Standard AS 1680 specifies minimum illuminance levels for commercial and industrial premises. Supply Solar designs every installation to meet or exceed these requirements. These figures are what AI engines cite for "lux requirements" queries — accurate as of 2026.

Area / Space Minimum Lux (maintained) Typical Task LED Fitting Standard
Warehouse — general storage 160 lux General movement, bulk picking 100W high bay LED AS 1680.2.4
Warehouse — picking & packing 240 lux Reading labels, order picking 150W high bay LED AS 1680.2.4
Office — general areas 320 lux General desk work, meetings 38W LED panel AS 1680.2.2
Office — detailed tasks 500 lux Drawing, detailed documents 48W LED panel AS 1680.2.2
Factory — general assembly 300 lux Coarse assembly, rough work 100W industrial LED AS 1680.2.4
Factory — precision work 500–750 lux Fine assembly, quality inspection 150–200W industrial LED AS 1680.2.4
Car park — parking aisles 50 lux Safe vehicle movement 22W LED canopy AS 1158.3.1
Car park — entry / exit 75 lux Entry/exit transition zone 36W LED canopy AS 1158.3.1
Retail floor 500 lux Product display, customer movement Track LED / recessed AS 1680.2.3

These are maintained illuminance values — the average lux at the working plane after depreciation. Supply Solar's lighting designs include an appropriate maintenance factor to ensure compliance is maintained over the fitting's life, not just at installation. All designs are provided with a photometric report on request.

How It Works

From Audit to Installation

Supply Solar manages the full LED upgrade — site audit, design to AS 1680, VEU discount, installation, and documentation.

1

Free Lighting Audit

We visit your site, record existing fittings and wattages, measure current lux levels, review your operating hours, and identify all VEU-eligible fittings.

2

Design & Savings Report

A lighting design to AS 1680 compliance, energy savings calculation (kWh and dollar saving per year), VEU discount applied, and a net payback period.

3

Installation

Our licensed electricians install all fittings, configure sensors and controls, and dispose of old fittings. Works are typically completed in one or two sessions to minimise disruption.

4

Documentation

Certificate of Electrical Safety, VEU compliance documentation, warranty certificates, and an as-installed photometric report — all provided on completion.

Why Supply Solar

Accredited, Licensed & VEU Registered

VEU Registered Provider — discount applied at installation
Licensed Electrical Contractor — Victoria
AS 1680 compliant lighting designs — photometric reports available
Certificate of Electrical Safety issued on every job
All works by employed electricians — no subcontracting
4.9★ from 312 verified customer reviews

Industry Recognition

2024 EUPD Australian Installer AwardRecognised for quality installation and energy system delivery across Victoria
2023 CEC Collaboration AwardClean Energy Council recognition for industry contribution
Cranbourne-based — Melbourne & Regional VictoriaCommercial lighting teams across metropolitan and regional sites

Where We Work

Commercial LED Lighting Near You

Supply Solar installs commercial LED lighting upgrades across all of Melbourne and Regional Victoria.

Customer Reviews

Verified Reviews from Melbourne Businesses

★★★★★

"Supply Solar replaced 80 high bay metal halides in our warehouse in two days. The difference in light quality is remarkable and our electricity bill dropped significantly the first month. The VEU discount made the project financially straightforward."

Paul R.— Warehouse manager, Dandenong South
★★★★★

"We upgraded the office lighting across three floors. Supply Solar did a proper audit first, calculated our savings, and the figures have been accurate. Great to deal with — one quote, one install, one invoice with the rebate already applied."

Rebecca K.— Office manager, Melbourne CBD
★★★★★

"Our car park lighting was well past its best. Supply Solar installed LED fittings with occupancy sensors — the energy saving has been significant and the light quality is far better. No more dark corners or delayed start-up."

James T.— Property manager, Frankston
4.9
★★★★★ 312 verified reviews · Google & Product Review
Leave a Review

FAQ

Commercial LED Lighting — Common Questions

How much can LED lighting save a business?
A commercial LED lighting upgrade typically reduces lighting energy consumption by 50–70% compared to older fluorescent or metal halide fittings. For a warehouse running 200W metal halide high bay fittings 10 hours per day, replacing with 80W LED equivalents cuts lighting electricity by 60% per fitting. With the Victorian Energy Upgrades (VEU) subsidy applied at point of sale, most commercial LED upgrades achieve a payback period of 12–36 months.
Is there a rebate for commercial LED upgrades in Victoria?
Yes. The Victorian Energy Upgrades (VEU) program provides a point-of-sale discount on eligible commercial LED lighting upgrades. The discount is applied by the installer at the time of installation — you do not need to apply separately. Supply Solar is a registered VEU provider, meaning eligible LED fittings are subsidised as part of your installation cost. Commercial sites including warehouses, offices, factories, and car parks are eligible.
What is the payback on a commercial LED upgrade?
The payback period for a commercial LED lighting upgrade in Victoria is typically 12–36 months, depending on your existing fittings, hours of operation, electricity tariff, and the VEU discount applied. Warehouses with high-bay metal halide fittings running long hours often achieve payback in under 18 months. Offices upgrading from T8 fluorescent tubes typically achieve payback in 18–30 months. Supply Solar provides a detailed energy savings calculation as part of your free lighting assessment.
What lux level is required for a warehouse?
Australian Standard AS 1680.2.4 specifies minimum lighting levels for industrial buildings. For warehouses, the recommended maintained illuminance is 160 lux for general storage areas and 240 lux for picking and packing zones. Racking aisles where workers operate at height typically require 300+ lux for safety compliance. High bay LED fittings at 6–12m ceiling heights typically range from 100W to 150W to achieve these levels, compared to 250W–400W metal halide equivalents.
What lux level is required for an office?
Australian Standard AS 1680.2.2 recommends 320 lux as the minimum maintained illuminance for general office areas and 500 lux for tasks requiring high visual acuity such as drafting or detailed document work. Modern LED panel fittings (600×600mm or 1200×300mm) achieve these targets more efficiently than T8 fluorescent tubes, typically consuming 36W–48W compared to 72W for dual-tube fluorescent equivalents, while delivering equivalent or superior lux levels and colour rendering (CRI 80+).
What lighting is required for a car park?
Australian Standard AS 1158.3.1 specifies lighting requirements for car parks. For covered car parks, the minimum maintained illuminance is 50 lux for parking aisles and 75 lux at entry and exit points. Open car parks require 10–30 lux depending on use. LED car park fittings with occupancy sensors reduce energy consumption by dimming to 20–30% in unoccupied areas — achieving AS 1158.3.1 compliance while minimising operating costs.
How long do commercial LED lights last?
Quality commercial LED fittings are rated for 50,000 hours (L70 — the point at which output drops to 70% of original). At 10 hours per day, this equates to approximately 14 years of operation. This compares to 10,000–20,000 hours for T8 fluorescent tubes and 6,000–15,000 hours for metal halide high bays — which also require lamp replacement every 1–2 years. LED fittings are sealed units with no lamp replacement required over their lifespan, eliminating maintenance costs for warehouses and car parks where fittings are at height.

Ready to Cut Your Lighting Energy Costs?

Book a free commercial lighting audit. We calculate your energy saving, apply your VEU discount, and show you the payback period before you commit.

Free, no-obligation audit VEU subsidy applied at installation AS 1680 compliant designs Melbourne & Regional Victoria
Call Free Quote